MD-150

Want to order our MD-150?

(330) 963-5400

MD-150 Overview

THE MD-150 PORTABLE. ULTRA-LOW INERTIA FOR PRECISE STEADY STATE TUNING. UPGRADABLE TO MECHANICALLY LINKED AWD & EASY TO MOVE IN THE SHOP

The 150 series 2WD dynamometer is a compact offering that let’s you tune street cars without a large dedicated space. The 150 portable includes a pallet jack modification on one end of the frame and two bottle jacks on the other allow you to move this dyno in your shop. The portability kit lets you free up space as needed. The portable 150 is ideal for smaller shops, schools and outdoor events. There is no need to secure the unit to the ground – simply lower the unit onto the ground, hook up the light-weight composite ramps and start testing. For more information on the Portable 150 2WD series dynamometer please contact us today.

MD-150 Specifications

Portable: Yes, via pallet-jack attachment

Max Horsepower: 1,200 hp peak measurement capacity

Max Absorption: 625 hp peak absorption single PAU

Loading Device: Air-cooled eddy current power absorber

Inertia: 630 lbs. base mechanical inertia

Max Speed: 165 mph (2WD)

Controls: Closed Loop Digital Controller with web based Holeshot Software. Includes Patented Virtual Road Simulation Technology.

Rolls/Wheelbase:

Precision machined & dynamically balanced
Front roll set may be grooved horizontally
8.575” (218 mm) diameter balanced rolls
35” (889 mm) face length
18” (457 mm) inner track width
88” (2,235 mm) outer track width
18” (457 mm) roll spacing

Roll Lock: Between roll lift with integrated roll lock

Roll Decelerator: Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.

Air Requirements: 100 PSI, dry, regulated, oil free

Power Requirements:

115 VAC, single phase, 60 Hz, 15 Amps (computer)
230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)

Axle Weight: 6,000 lbs. maximum

Shipping Weight: 3,000 lbs. (dynamometer weight only)

Upgradeable to AWD: Yes