output load unit-eddy current pau

EXPERIENCE COUNTS

Mustang has more experience with the application and operation of eddy current power absorbers than any system integration company in the world.
Mustang’s unique design of the MD-AC/EC-TRANS-HD Series Transmission Dynamometer allows the power absorber to be cradle mounted with a load cell and speed encoder (not the unrelated current) in order to actively measure the output torque and speed of the transmission to instantaneously determine the output power of the transmission. The mounted load cell is an included device.

The control system allows the measurement of the PAU applied torque as well as the induced acceleration torque applied by the mass of the power absorber’s inertia. This is required to accurately measure power during transient testing.
The absorber can be adjusted in the vertical plane of the transmission by positioning it with a simple dual jackscrew device and locking with fasteners. 

The air-cooled eddy current power absorber has a fast responding controller driving the PAU coils. A high power controller allows for fast response and quick settling times. The air-cooled PAU only requires air for cooling - NO WATER!

Output Load Absorption Units - Specifications
 
MD-EC-800
MD-EC-400
MD-EC-250
MD-EC-140
Intermittent Power Absorption :
1,500-hp
750-hp
625-hp
150-hp
Intermittent Torque :
1,576 ft-lb.
788 ft-lb
657 ft-lb
200 ft-lb
Continuous Power Absorption :
500-hp
250-hp
190-hp
50-hp
(or until Prime Mover over temp)
Continuous Torque :
525 ft-lb
263 ft-lb
200 ft-lb
100 ft-lb
Intermittent Speed Range :
0 to 5,300 RPM
Continuous Speed Range :
0 to 4,800 RPM
Stall Torque Capacity :
4,000 ft-lb
3,000 ft-lb
3,000 ft-lb
1,500 ft-lb
Load Direction :
Bi-directional CW,CCW with full load
Power Rquirement :
230 VAC, 1 Phase 100 Amp
230 VAC, 1 Phase, 50 Amp
230 VAC, 1 Phase, 40 Amp
230 VAC, 1 Phase, 40 Amp
1 l 2 l 3 l 4 l 5
 

2300 Pinnacle Parkway Twinsburg, OH 44087
Phone: 330-963-5400
Fax: 330-425-3310

 Search the Site
 

  Transmission Dynamometers  

Research / Development

Heavy Duty / Military
Light & Medium Duty
End of Line Testing
Calibration Dynos
Upgrade Your Dyno
 
More Options
Financing
Request a Quote
Why Choose Mustang?
 
 
      © 2005 Mustang Dynamometer