Chassis Dynamometers

Portable MD-Gladiator

8.575" Rolls, 150-mph, 1,200-hp, 2WD Low-Profile Chassis Dynamometer

Portable MD-Gladiator - Ultra-low inertia for precise steady state tuning

Mustang’s Portable Gladiator Series is the perfect solution for shops with limited space that would like to have a dyno that they can move out of the way when it is not being used. The low profile design and relatively small footprint of the Gladiator makes it ideal for these situations. Mustang has intgrated a lift jack like you would see on a standard pallet jack into the frame of the Gladiator and equipped the opposite side of the dyno with retractable heavy-duty casters to make moving the dyno around the shop easy for a single person. Simply roll the dyno into place, plug it in and attach the ramps and you are ready to perform performance tuning and diagnostics testing in minutes. When you’re finished, simply jack it up and roll the dyno out of the way. It’s a very practical way to solve the problem of limited space in your shop. A portable Gladiator is also a great fit for those that are considering sharing a dyno with another business.

As far as performance goes, you sacrafice nothing. The portable Gladiator has every capability of the standard Gladiator, only it has the added benefit of being mobile.

Check out the performance specifications of the Gladiator.

Not only does Mustang offer the best technology when it come to dynos, but we also offer the best portable packages in the industry. Whatever your application calls for, Mustang has a dynamometer to fit its needs.

Gladiator Series
Max Horsepower: 1,250 hp peak measurement capacity
Max Absorption: 625 hp peak absorption single PAU
Loading Device: Air-cooled eddy current power absorber
Inertia: 630 lbs. base mechanical inertia
Max Speed: 160 mph
Controls: Closed Loop Digital Controller with WindowsXP based PowerDyne Software. Includes Patented Virtual Road Simulation Technology.

Precision machined and dynamically balanced

Front roll set may be grooved horizontally

8.575” (218mm) diameter balanced rolls

35” (889mm) face length

30” (762mm) inner track width (Exceeds EPA/BAR Stds)

100” (2,540mm) outer track width

17.1” (434mm) roll spacing

Roll Lock: Between roll lift with integrated roll lock
Roll Decelerator: Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.
Air Requirements: 80 PSI, dry, regulated, oil free
Power Requirements:

115 VAC, single phase, 60 Hz, 15 Amps (computer)

230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)

Axle Weight: 6,000 lbs. maximum
Shipping Weight: 3,000 lbs. (dynamometer weight only)

Portable MD-Gladiator

Portable MD-Gladiator
Detailed Specifications for the Portable MD-Gladiator
1.21 MB

Portable Chassis Dynamometers

Portable Chassis Dynamometers
2011 Mustang Dynamometer Portable Chassis Dynamometer Series Brochure.
2.18 MB

Hardware/Accessories Catalog

Hardware/Accessories Catalog
Dynamometer Hardware & Accessories Catalog
4.16 MB

PowerDyne Manual

PowerDyne Manual
Detailed User's Manual for Mustang Dynamometer's PowerDyne PC Software.
4.5 MB