12.625" Rolls, 190-mph, 1,500-hp, 2WD Upgradeable to AWD-500
For those shops that wish to ease into the dynamometer performance tuning market one step at a time, Mustang offers a perfect solution. The MD-500 dyno. An excellent 2WD performance dyno in and of itself, the MD-500 is simply one-half of the MD-AWD-500 system. The MD-500’s multiple upgrade paths allow it to accept Mustang’s AWD upgrade in the future and also enable it to accept a second eddy current PAU for increased loading capability should you ever feel the need to expand your testing capabilities.
The MD-500 is also a low inertia dynamometer, which means it has enhanced sensitivity to minor and rapid changes in torque and power being applied by your cars – making it ideal for precision steady state tuning.
With 1,500-hp measurement capacity, the MD-500 can handle high performance front wheel and rear wheel drive vehicles. If your shop caters to the motorcycle market too, the MD-500 series can be purchased with the optional motorcycle adaptor kit.
Mustang’s PowerDyne PC Software is Windows based, and offers the user the ability to test and tune vehicles using the industry’s most expansive software program. In addition to steady state tuning, PowerDyne allows the user to perform Power Pulls, Drive-cycle Emulation, 1/4 and 1/8 mile Sprint Tests, Emulated Emissions Tests, and General Road-Testing. A full graphing and report utility is available to the user for post-analysis of individual runs.
|Max Horsepower:||1,500 hp|
|Max Absorption:||900/1,800 (SE/DE model)|
|Loading Device:||Air-cooled eddy current power absorber|
|Torque Measurement Device:||Strain Gauge Type Dynamic Load Cell. Provides closed loop control signal for dynamic vehicle loading.|
|Inertia:||1,190 lbs. nominal inertia|
|Max Speed:||190 mph|
|Controls:||Closed Loop Digital Controller with WindowsXP based PowerDyne Software. Includes Patented Virtual Road Simulation Technology.|
Precision machined and dynamically balanced, knurled rolls
Belted for bi-directional capability
12.625” diameter balanced rolls
31” face length
18” inner track width
80” outer track width (98” optional)
|Roll Lock:||Between roll lift with integrated roll lock|
|Roll Decelerator:||Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.|
|Air Requirements:||80 PSI, dry, regulated, oil free|
115 VAC, single phase, 60 Hz, 15 Amps (computer)
230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)
230 VAC, three phase, 60 Hz, 40 Amps (DE model)
|Axle Weight:||6,000 lbs. maximum 12,000 lbs. maximum available|
|Shipping Weight:||5,000 lbs. (dynamometer weight only)|
Detailed Specifications for MD-500
Conceptual Drawing of the MD-500
Pit Drawings for the MD-500 - For Reference Only, please contact us for official pit specifications.
Dynamometer Hardware & Accessories Catalog
Detailed User's Manual for Mustang Dynamometer's PowerDyne PC Software.
Quick Start Guide
Helpful guide with important tips for new dyno owners.