Chassis Dynamometers

MD-AWD-800 Series

24" / 12.625" Rolls, 200-mph, 3,000-hp, 1,800-hp Peak Absorption, 2WD or AWD Modes

Mechanically-linked AWD dyno

Mustang designed the MD-AWD-800 Series to be a dyno that could be easily adapted to fit virtually any testing scenario without ever having to compromise. In AWD mode, the 800 Series XL can test AWD vehicles with wheelbases up to 134” long, enough to handle Hummer H1s. In 2WD mode, the 800 Series uses a single 24” diameter roller with a low base mechanical inertia to allow you to test the lightest vehicles out there.

As an option, the 24” roller can be ordered as a “split-roll”, which allows the system to be further de-coupled,  taking the system down to a single 24”roller and PAU, perfect for testing motorcycles.

When Mustang says that the MD-AWD-800 is the most versatile AWD dyno at any price, this is what we mean. You can test any vehicle or motorcycle that comes through your door. Switch from AWD to 2WD to MC modes with a simple click of the mouse when equipped with the optional air-actuated de-coupling systems.

Like all Mustang dynos, the MD-AWD-800 includes all of the advanced tuning capabilities that are included with the standard PowerDyne Software application such as constant speed, constant torque, step tests, and elapse time tests like 1/4 sprint – all performed using Mustang’s patented Vehicle Simulation technology where the dyno automatically controls the loading to simulate actual “on-road” conditions.

MD-AWD-800 Series
Horsepower: 2,000/3,000 hp peak measurement capacity (2WD/AWD)

Air-cooled eddy current power absorber (model MDK-250)

Inertia: 3,300 lbs. (AWD) / 1,800 lbs. (2WD) / 700 lbs. (bike)
Max Speed:

175 mph (AWD Mode)

200 mph (2WD Mode)


Closed Loop Digital Controller with WindowsXP based PowerDyne Software. Includes Patented Virtual Road Simulation Technology (RST)


Precision machined and dynamically balanced, knurled rolls

24” rear & 12.625″ diameter balanced front rolls

1 x 86″ (single roll)

2 x 28″ face length (split-roll)

30″ inner track width

86″ outer track width

86″-134″ wheelbase

Roll Lock: Pneumatic for locking rolls (not for loading)
Roll Decelerator:

Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.

Air Requirements: 80 PSI, dry, regulated, oil free
Power Requirements:

115 VAC, single phase, 60 Hz, 15 Amps (computer)

230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)

230 VAC, three phase, 60 Hz, 40 Amps (DE model)

Axle Weight: 10,000 lbs. maximum
Shipping Weight:

15,000 lbs. (dynamometer weight only)

Quick Start Guide

Quick Start Guide
Helpful guide with important tips for new dyno owners.
743.15 kB