42" Rolls, 225-mph, 2,750-hp, 1,200-hp Peak Absorption
In anticipation of the growth in the sport compact segment, Mustang engineered the first and only low inertia, large roll dynamometer designed to handle the highest horsepower sport compact cars on the planet.
The IMP Series is capable of measuring up to 2,750-hp in power sweep mode and for tuning purposes, the SE model provides 600-hp absorption capabilities. With low inertia rolls, the MD-IMP Series is designed for testing lightweight vehicles that make big horsepower numbers. The key behind the IMP Series is its ability to accurately simulate road-load on vehicle-driver combinations weighing as little as 1,600 lbs via its modest inertia properties and Mustang’s patented Virtual Inertia™ Technology. Professionals specializing in import market niches can take advantage of all of the benefits of an advanced eddy current chassis dynamometer; 1/4 mile runs and 0-60 runs, both from a standstill, can be performed on the SE model with precise accuracy – regardless of how much weight you’ve managed to shave off the stock set-up or how much power you have added to the engine.
|Max Horsepower:||2,750 hp|
|Max Absorption:||600/1,200-hp peak absorption (SE/DE model)|
|Loading Device:||Air-cooled eddy current power absorber (model MDK-250)|
|Torque Measurement Device:||Strain Gauge Type Dynamic Load Cell. Provides closed loop control signal for dynamic vehicle loading.|
|Inertia:||1,600 lbs. equivalent base mechanical inertia|
|Max Speed:||225 mph|
|Controls:||Closed Loop Digital Controller with WindowsXP based software. Includes Patented Virtual Road Simulation Technology (RST)|
Precision machined and dynamically balanced
42” diameter balanced roll per wheel
25” face length (23” knurled)
30” inner track width
80” outer track width
|Roll Lock:||Industrial brake pad in contact with O.D. of roll|
|Roll Decelerator:||Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.|
|Air Requirements:||80 PSI, dry, regulated, oil free|
115 VAC, single phase, 60 Hz, 15 Amps (computer)
230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)
230 VAC, three phase, 60 Hz, 40 Amps (DE model)
|Axle Weight:||6,000 lbs. maximum 12,000 lbs. maximum available|
|Shipping Weight:||8,500 lbs. (dynamometer weight only) 10,500 lbs. (DE model)|
Detailed specifications for the MD-IMP.
Conceptual Drawings of the MD-IMP
Pit Drawing for the MD-IMP - For Reference Only, please contact us for official pit specifications.
Dynamometer Hardware & Accessories Catalog
Detailed Operator's Manual for the MD-IMP.
Detailed User's Manual for Mustang Dynamometer's PowerDyne PC Software.
Quick Start Guide
Helpful guide with important tips for new dyno owners.