Chassis Dynamometers

MD-800 Series

24" Single Roll, 200-mph, 2,000-hp, Inertia-Only or Eddy Current

The MD-800 - A compact single roll 2WD system with tons of capabilities

For instances where a performance shop is interested in performing basic dynamometer runs for peak power measurement and overlapping multiple runs to quantify performance gains or losses resulting from changes to the vehicle, the MD-800 offers the perfect combination of competitive pricing and performance capabilities as an inertia-only dyno, while allowing an easy upgrade path to add power absorption when you are ready to offer professional steady-state tuning services. Once added, the eddy current upgrade allows for steady state tuning of high performance EFI vehicles via a 900-hp power absorber module.

With a large single 24″ roller, the MD-800 is capable of handling most rear-wheel drive and sport compact steady state tuning applications with ease. Also available with the more sophisticated eddy current dynamometers is the ability to perform road-load simulation, 1/4 mile passes, 1/8 mile passes and more. Add the Integrated Drag Racing Timing System and our NEW DragSim Real-Time Race Animator and now you can run an indoor drag racing league right inside your facility, regardless of the weather outside.

The standard MD-800 is designed to be installed in a pit for a flush-floor installation, but the compact system also is easily mounted right on your shop floor with the addition of a 4 post lift option.

MD-800 Series
Max Horsepower: 2,000 hp
Max Absorption: 900 hp
Loading Device: Air-cooled eddy current power absorber (model MDK-250)
Torque Measurement Device: Strain Gauge Type Dynamic Load Cell. Provides closed loop control signal for dynamic vehicle loading.
Inertia: 1,800 lbs. base mechanical inertia
Max Speed: 200 mph
Controls: Closed Loop Digital Controller with WindowsXP based software. Includes Patented Virtual Road Simulation Technology (RST)
Rolls/Wheelbase:

Precision machined and dynamically balanced, knurled rolls

24” diameter balanced roll

86” outer track width

Roll Lock: Pneumatic for locking rolls (not for loading)
Roll Decelerator: Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.
Air Requirements: 80 PSI, dry, regulated, oil free
Power Requirements:

115 VAC, single phase, 60 Hz, 15 Amps (computer)

230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)

Axle Weight: 10,000 lbs maximum
Shipping Weight: 4,500 lbs. (dynamometer weight only)
MD-800 Series

MD-800 Series
Detailed specifications for the MD-800.
1.06 MB

MD-800 Series

MD-800 Series
Conceptual Drawings of the MD-800
142.34 kB

Hardware/Accessories Catalog

Hardware/Accessories Catalog
Dynamometer Hardware & Accessories Catalog
4.16 MB

PowerDyne Manual

PowerDyne Manual
Detailed User's Manual for Mustang Dynamometer's PowerDyne PC Software.
4.5 MB

Quick Start Guide

Quick Start Guide
Helpful guide with important tips for new dyno owners.
743.15 kB