Chassis Dynamometers

MD-600 Series

19.75" Rolls, 200-mph, 2,000-hp - Easily Handle Dually Diesel Trucks

MD-600 - Our largest low-profile design performance dynamometer.

With 19.75” rollers and low-profile, cradle-roll design, the MD-600 combines all the right qualities to make it an ideal dyno for those that specialize in serving the niche high performance diesel truck market. Not to say that the MD-600 can’t handle virtually any other street car out there, but the wide outer track width, low inertia of the system and the robustness of the design make the MD-600 capable of handling the most extreme high torque vehicles.

The MD-600 is capable of measuring 2,000 horsepower and a top speed of 200-mph. A single eddy current PAU gives this dyne 900-hp of braking, while adding another PAU doubles this to 1,800-hp of loading capacity for steady state tuning and loaded mode testing.

The MD-600 features a heavy-duty structural steel frame, 4 precision balanced rollers, and a heavy duty vehicle restraint kit. Our computer based PowerDyne Controller features full database, data acquisition, graphing, and printing capabilities. Optional accessories include an A/F meter, an integrated engine tachometer interface, diesel smoke opacity meter, and a host of other options.

MD-600 Series
Max Horsepower: 2,000 hp
Max Absorption: 900/1,800 (SE/DE model)
Loading Device: Air-cooled eddy current power absorber (model MDK-250)
Torque Measurement Device: Strain Gauge Type Dynamic Load Cell. Provides closed loop control signal for dynamic vehicle loading.
Inertia: 2,000 lbs. base mechanical inertia
Max Speed: 200 mph
Controls: Closed Loop Digital Controller with WindowsXP-based software. Includes Patented Virtual Road Simulation Technology (RST)
Rolls/Wheelbase:

Precision machined and dynamically balanced, knurled rolls

19.75” diameter balanced roll

108” outer track width

Roll Lock: Pneumatic for locking rolls (not for loading)
Roll Decelerator: Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.
Air Requirements: 80 PSI, dry, regulated, oil free
Power Requirements:

115 VAC, single phase, 60 Hz, 15 Amps (computer)

230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)

Axle Weight: 6,000 lbs. maximum 12,000 lbs. maximum available
Shipping Weight: 4,500 lbs. (dynamometer weight only)
MD-600 Series

MD-600 Series
Detailed specifications for the MD-600.
1.34 MB

MD-600 Series

MD-600 Series
Conceptual Drawing of the MD-600
152.03 kB

MD-600 Series

MD-600 Series
Pit Drawings for the MD-600 -For Reference Only, please contact us for official pit specifications.
184.2 kB

Hardware/Accessories Catalog

Hardware/Accessories Catalog
Dynamometer Hardware & Accessories Catalog
4.16 MB

MD-600 Manual

MD-600 Manual
Detailed Operator's Manual for the MD-600.
16.83 MB

PowerDyne Manual

PowerDyne Manual
Detailed User's Manual for Mustang Dynamometer's PowerDyne PC Software.
4.5 MB

Quick Start Guide

Quick Start Guide
Helpful guide with important tips for new dyno owners.
743.15 kB