| Horsepower: |
4,000 hp peak measurement capacity - AWD mode(2,000
hp/axle)
1,200 hp peak absorption - AWD mode
2,000 hp peak measurement capacity - 2WD mode
600 hp peak absorption - 2WD mode |
| Loading: |
Twin Air-cooled eddy current power absorber |
| Maximum Speed: |
200 mph (Intermittent AWD)
225 mph (2WD) |
| Inertia: |
3,000 lbs / 1,450-lbs (nominal) |
| Controls: |
Pentium-based PC control system with PowerDyne PC Control Platform Roll-around console standard |
| Hand Control: |
Wireless in-car controls available |
| Rolls: |
Precision machined & dynamically balanced
Kurled finish for superior tire traction belted for bi-directional capability.
42" (1,067 mm) diameter balanced rolls
25" (635 mm) face length
30" (762 mm) inner track width
80" (2,032 mm) outer track width
86" - 150" (2,184 - 3,810 mm) wheelbase accommodation via moving roller sets |
| Transmission / Adjustment : |
Twin low backlash right angle gears connected via large slipping driveline
230VAC three phase motor for electronic wheelbase adjustment |
| Roll Lock : |
Pneumatic Roll Lock |
| Axle Weight: |
6,000 lbs (5,455 kg) maximum per axle |
| Shipping Weight: |
25,000 lbs -(dyno only) |
| Air Requirements: |
80 PSI, dry, regulated, oil free |
| Power Requirements: |
115 VAC single phase, 60 Hz, 15 Amps (Computer)
230 VAC, three phase, 60 Hz, 60 Amps (dyno controls)
230 VAC, three phase, 60 Hz, 20 Amps (wheelbase adjustment) |
